Technical data
| Size | S | M | L | XL |
|---|---|---|---|---|
| Pilot height (m) | <1.68 | 1.65 – 1.78 | 1.75 – 1.88 | 1.85> |
| Total weight * (g) | 884 | 924 | 972 | 1000 |
| Distance between carabiner and seat (cm) | 45 | 47.5 | 50 | 52 |
| Distance between carabiners (cm) | 36-44 | 36-44 | 36-46 | 36-46 |
| Certification | EN-LTF | |||
| Number of certification | PH_348.2021 | |||
| Type of closing strap system | Get-Up | |||
| Type of protection | Inflatable (optional) | |||
| Max peak of impact (g) | 34.93 | |||
| Total weight of protection(g) | 429 | |||
| Speed bar included (g) | 47 | |||
| Rucksack weight 12 lt (g) | 87 |
*Harness weight including carabiners.
Package
- Harness
- Karabiners
- Lightweight webbing two-step speed bar with foot elastic
- Ultra-light 12L rucksack
Optional extras
Options designed for TransAlp 2:
- Woody Valley TransAlp 2 Inflatable Protector
- Woody Valley Inflation & Compression Bag
- Woody Valley Inflatable Bag
- Woody Valley Air Pump
- Woody Valley Front Reserve Container Anthracite Light AP193
General options:
- Reserve Outer Containers
- Reserves
- Radio, Camera & Phone Holders
- Harness Spares
TransAlp 2: Comfort and lightness… perfectly balanced
The TransAlp 2 is the ideal harness for Hike & Fly for those who want light weight and low volume without sacrificing comfort in flight (and on the ground). The most important extra feature for the TransAlp 2 is its optional inflatable protector, which has been designed in such a way as to provide good safety whilst keeping minimal pack size.
- Split leg design (separate connected leg supports without seat board)
- Leg strap loops connect directly to the main carabiners
- Lightweight webbing two-step speed bar with foot elastic
- Spacious rear pocket – Integrated stowage container on the back
- Air intake that allows you to have a perfect shape of the harness in flight
- Chest strap buckle with in-built whistle
- Built-in Recco safety system
- Anthracite and orange colour
- 4 sizes available
- Inflatable protector (optional extra)
Recco reflector
- The RECCO detector emits a directional radar signal, like the beam of a flashlight
- When the radar signal hits the RECCO reflector, it is echoed back to the detector and points the rescuer in the direction of the pilot.
- The closer the detector gets to the reflector, the stronger the returned-signal, ultimately allowing the rescuer to pinpoint the pilot’s location.
A new protector as optional extra
They have developed a new protector thanks to the experience gained with the inflatable protector of the GTO light 2.
This protector has been designed in such a way that it “wraps” the harness guaranteeing you a lot of safety but keeping the dimensions in the backpack minimal.
Dedicated harness backpack
The TransAlp 2 is sold with its 12-liter backpack which holds it perfectly.Rucksack 12 is a backpack for everyday use, when you are not using it, you can easily fold it into its integrated pouch.
Rucksack 40-55-70 and Transalp 2, the perfect combo.
Carry your TransAlp 2 and your glider in a comfortable backpack
FAQ
- How do I attach the leg straps?
The leg straps have a green loop on the right side and a red loop on the left side. Once you’ve put on your TransAlp 2, you can easily clip each loop into the main carabiner of the same color. Make sure the words LEFT and RIGHT face in after you hang them.
- What is the elastic of the speed bar for?
The speed bar is very light and the wind would push it back during flight. The foot elastic enables you to have the speed bar always at reach.
Woody Valley support
For Woody Valley manuals, downloads, product registration and support go to Woody Valley Support.
Code: P014
