Indoor Traditional Sauna · Timber Front
Auroom Baia 2 Person Indoor Sauna
What separates the Baia from the rest of Auroom’s indoor range is the seat. The upper bench is a curved, contoured lounger, and Auroom build the cabin on one footprint only — 163 centimetres square, or 64.25 inches each way, with a 58-inch room inside under a 78-inch ceiling.
This is the timber-fronted configuration: clad paneling across the elevation with a full-height glass door set into the middle of it. Interior and exterior finishes both read thermo-aspen, run horizontally in STP paneling at 0.59 by 3.54 inches.
Capacity2 BathersContoured upper benchInterior58″ × 58″78″ ceilingExterior64.25″ × 64.25″80.75″ tallWeights992 lbs1,150 lbs shippedErgonomic contoured benchMovable stepping bench includedTimber front with a glass doorOne footprint, 163 cm square
The Build
One Plan, Built Around A Curved Bench
Auroom offer the Baia in a single size and put the design effort into what happens inside it. Four entries on this spec sheet explain the cabin.
?The Contoured LoungerThe upper bench carries a shaped profile, and the kit lists it separately as an ergonomic bench with its own supports and frame. Auroom’s claim for it is direct: contoured benches are usually only found in larger custom saunas.Ergonomic Bench?163 Centimetres SquareAuroom publish one footprint for the Baia. Outside it is 64.25 inches on both axes and 80.75 tall; the room inside is 58 by 58 with 78 inches of headroom, which leaves 6.25 inches per axis to the walls.64.25″ × 64.25″?Eight Wall Elements, Five Base ElementsThe cabin arrives as previously assembled parts: eight wall elements, five base elements, four corner posts, four corner mouldings and two ceiling elements, with cladding already applied to two side walls.Pre-Assembled Panels?Thermo-Aspen On Both FacesInterior Finish and Exterior Finish both read thermo-aspen, horizontal STP paneling at 0.59 by 3.54 inches. Auroom describe the source as sustainably grown aspen from northern Europe, thermally modified with heat and steam alone.STP 0.59″ × 3.54″
Why Athletes Choose This
Eight Things Auroom List For The Baia
These cards stay on the specification and the packing list. Nothing here claims an effect on the body — that is not what a spec sheet is for, and the tabs above hold the rest of the detail.
?Curved contoured bench with backrestBaia Signature?Movable stepping bench for upper accessSeating?58 inches square insideInterior Plan?Clad timber front with a glass doorWood Configuration?LED light strip behind the backrestLighting Type⚖️992 lbs assembled, 1,150 shippedPublished Weights?️Matching heater safety guard suppliedIncluded?Floor grid included, duckboard floor typeFloor
The Timber Front
Four Views Of The Baia
Front Wall
Paneling Either Side Of A Central Door
The timber-fronted Baia puts clad paneling across the elevation with the glass door in the middle of it. The door is listed on its own line — clear, 8 mm tempered, 24.2 inches wide — set in a 64.25-inch elevation that stands 80.75 tall. Auroom describe the door as a premium unit with a metal and wood handle, and note the opening direction can be changed to suit the room.
- Front elevation 64.25″ wide by 80.75″ tall
- Clear 8 mm tempered door glass, 24.2″ wide
- Front finished in horizontal thermo-aspen paneling
- Metal-wood door handle on metal hinges
- Door frame can be installed to open right or left
24.2″ Door8 mm TemperedThe Bench
A Shaped Upper Bench And A Bench You Can Move
This is the layout Auroom design the Baia around. The upper bench sweeps into a contoured backrest, and a separate movable stepping bench sits on the floor for getting up to it. The kit lists bench supports, an upper bench frame, the ergonomic bench, bench grids, backrest mounting blocks and a backrest carrying its LED light. The heater in frame is a separate purchase.
- Ergonomic contoured bench with backrest
- Flat bench listed alongside it to use the space
- Movable stepping bench for upper access
- Backrest with LED light, plus mounting blocks and a lightshade
- Heater guard included, heater sold separately
Seats 2Contoured LoungerPanels
Cladding Carried Around The Corner
Exterior Panels Included reads two fully clad side panels, and this angle shows the paneling turning the corner from the front onto the side. Auroom preserve the timber with what they describe as Finland’s finest natural sauna wax. Four corner posts and four corner mouldings come in the crate to close the joints, with finishing mouldings for the rest.
- Cladding on 2 side walls in horizontal thermo-aspen
- Four corner posts and four corner mouldings
- Two ceiling elements and five base elements
- Finishing mouldings supplied
- Timber preserved with natural sauna wax, per Auroom
2 Clad SidesWaxed FinishFootprint
163 Wide, 205 High, And A 1,150 lb Pallet
Auroom’s elevation drawing carries the two dimensions that decide the room: 163 centimetres across and 205 high. In inches that is 64.25 by 80.75, with a footprint of about 28.7 square feet by our calculation from the published dimensions. The cabin weighs 992 lbs assembled and 1,150 crated, and Auroom give the shipping package as 48 by 91 by 50 inches.
- Exterior 64.25″ W × 64.25″ D × 80.75″ H
- Roughly 28.7 sq ft occupied, calculated
- 992 lbs assembled, 1,150 lbs shipped
- Shipping dimensions 48″ L × 91″ W × 50″
- Allow clearance in front for the door arc
28.7 sq ft80.75″ Tall
The Baia Pair
Timber Front Or Glazed Front
Both Baia cabins hold the same 58-inch room, the same contoured bench and the same 992 lb assembled weight. This one closes the elevation in thermo-aspen paneling with a single glass door in the centre of it.
You’re HereBaia — 2 PersonClad timber front with a 24.2-inch glass door in the middle.Seats 2 bathers64.25 × 64.25 × 80.75 in exterior58 × 58 × 78 in interiorShips at 1,150 lbsCurrently viewingBaia Glass — 2 PersonA full glass front, with a corner configuration also offered.Seats 2 bathers64 × 66 × 82 in exterior58 × 58 × 78 in interiorShips at 1,150 lbsShop the Baia Glass
Questions
Frequently Asked Questions
58″ W × 58″ D × 78″ H, rated by Auroom for two bathers. From those dimensions the floor works out at about 23.4 square feet and the volume at roughly 152 cubic feet — our arithmetic, since Auroom publish the dimensions but no area or volume.It is a shaped upper bench that sweeps into a backrest, listed in the packing slip as an ergonomic bench with its own supports, upper bench frame and bench grids. Auroom’s claim for it is that contoured benches are usually found only in larger custom saunas. A movable stepping bench ships alongside it for getting up to the upper level, and a flat bench is listed to use the remaining space.No. Auroom build the Baia on one footprint, 163 centimetres square, which is the 64.25 by 64.25 inches on this spec sheet. The choice is the front elevation: this timber-fronted version, or the Baia Glass, which glazes the front and is also offered in a corner configuration.No. The Baia kit covers eight previously assembled wall elements, five base elements, four corner posts, four corner mouldings, two ceiling elements, cladding on two side walls, bench supports, the upper bench frame, the ergonomic bench, a lightshade, backrest mounting blocks, a backrest with LED light, bench grids, the door frame, 8 mm tempered door glass, a metal-wood handle, metal hinges, a heater guard, the floor grid and finishing mouldings. Accessories are the bucket, ladle, thermometer, hygrometer, sand timer, aroma set, sauna hat and sauna pillow. A heater guard is on that list; a heater is not — choose one from the heater options on this page.Thermo-aspen, listed for interior and exterior alike, in horizontal STP paneling at 0.59″ × 3.54″. Auroom describe it as sustainably sourced aspen from northern Europe put through an organic thermal modification using only heat and steam, and claim the result is superior to other woods under extreme sauna conditions. They also state the timber is preserved with Finland’s finest natural sauna wax.LED strip, set behind the backrest, which Auroom describe as elegant illumination. The backrest arrives with its LED light in place, and backrest mounting blocks and a lightshade come in the same crate. Lighting runs on the 120V side of the electrical requirement.240V for the sauna heater and 120V for the interior and exterior lights. Because the heater is bought separately, confirm the exact circuit rating against the heater you select — the heater packages offered on this page differ in draw. Sauna heater wiring should be run by a licensed electrician.Outside dimensions are 64.25″ W × 64.25″ D × 80.75″ H, about 28.7 square feet of floor by our calculation. Assembled weight is 992 lbs and shipping weight 1,150 lbs, with the shipment listed at 48″ L × 91″ W × 50″. Check ceiling height against 80.75 inches and measure the route in against that package.Curbside delivery via freight to the 48 contiguous states, with delivery damage insurance included. The freight carrier contacts you 24 to 48 hours ahead to set a day and time Monday through Friday inside a 4-hour window, and will not deliver without speaking to you first. The sauna arrives strapped to a pallet on a 53-foot semi-truck with a single driver, who unloads to your curbside or driveway only. Raise anything unusual about your access — long driveway, low branches, stairs, apartment complex — with us before the sauna ships. When the driver unloads, inspect the boxes and note any scratches, dents, or scuff marks on the delivery receipt. You do not need to open the boxes to do that.The warranty is Auroom’s and its full text sits in the Warranty tab on this page; we have left it there unparaphrased because manufacturer terms are specific and the tab holds the complete version. Auroom are a Latvian manufacturer and part of the Thermory group, which supplies their timber. Ask us for the written warranty if you want it in hand before ordering.
